Home > Kitchen > Base > Standard >

1 door base cabinet with pullout (HAFELE base pullout 2, 2 x shelves included)

1 door base cabinet with pullout (HAFELE base pullout 2, 2 x shelves included)

Alternative Views:

Retail Price $1,375.11
Sale Price + Options: $763.95


Cabinet Size (base cabinets)




Doors and Drawer Fronts
Click to view another Door and Drawer Front Style

Door and Drawer Front Style*:

Click to view another Door and Drawer Front Wood Type

Door and Drawer Front Wood Type*:

Door/Drawer Front Prefinishing*:

Advanced Options
Click to view another Toe Kick

Toe Kick*:

I have read the "notes" and agree to all conditions

Notes (room ID or custom tag):

This is a base cabinet that includes a Hafele base pullout 2 and two shelves in GREY/champagne finish (CHANGED FROM MAPLE TO DARK GREY MELAMINE ON 1-30-23). This cabinet includes the cabinet case, pullout frame, and two maple melamine shelves that have a coating that ensures the objects do not slide around (slightly sticky/rubber feel).

DISCLAIMER: 1. The door will not have pre drilled holes. The customer will be required to drill 6 pilot holes on the backside of the door itself, using a small drill bit on site. See the included instruction sheet, or the pictures of the product on our website for info on the hole locations.

*Note, these holes required are outside of the tolerances set fourth by our drilling jigs. All pilot holes are drilled inside the cabinet itself, so you don't have to drill any of the holes that mount the pullout frame to the cabinets case (top,bottom) :)
Custom Cabinets - Made In Oregon using globally sourced materials

Standard Cabinets Construction (the interior is not visible once doors/drawer are closed)

  • All cabinets are shipped ready to assemble (i.e. flat packed)
  • Full overlay (flush look) frame-less construction (European style, confirmat screw assembly, no glue or additional tools needed, just a screwdriver)
  • Full access (maximum storage capacity with no wasted space)

Doors are custom made and hand sanded in Oregon using high quality hardwoods.
Cabinet Cases are made in Oregon using globally sourced 3/4" thick birch plywood. Veneer is an ultra durable, baked-on UV clear finished real wood Birch veneer. Plywood core is a 3/4" thick core (11 ply, 9 ply, or 7ply, depending on availability).
Drawer Boxes are made in Oregon using globally sourced 5/8" solid Rubberwood finger joint lumber (clearcoat finished in a matte sheen, shipped fully assembled and notched for under-mount drawer slides, *dovetailed drawer box joints are left raw wood and will not have a finish applied).

Hinges are made in North Carolina, Blum "Clip Top" Blumotion (soft closing, self closing)
Drawer slides are Globally sourced, Under-mount, Soft-Close, full Extension, 75lbs capacity
All needed hardware for assembly is included with your order (includes assembly screws, shelf pins, hinge plates, etc)
*Knobs and Pulls are not included with any of our cabinets

*Construction holes will be visible on the sides, top, and bottom of the cabinet once assembled.
**Finished end panels (ordered separately) should be ordered to finish off the exposed cabinet sides after installation.

Share your knowledge of this product. Be the first to write a review »