Home > Kitchen > Wall > Standard >

2 door wall cabinet with no bottom (Doors have larger 1/4" bottom reveal to allow for countertop installation and appliance garage use)

2 door wall cabinet with no bottom (Doors have larger 1/4" bottom reveal to allow for countertop installation and appliance garage use)
 
Alternative Views:


Retail Price $860.95
Sale Price + Options: $477.95



Free Shipping
Product Code: W2DAPPLIANCEGARAGE

Cabinet Size (wall cabinets)

WIDTH*:


HEIGHT*:


DEPTH*:

Doors and Drawer Fronts

Door and Drawer Front Style*:


Door and Drawer Front Wood Type*:


Door/Drawer Front Prefinishing*:


Glass Door Prep*:

Advanced Options

Disclaimer*:
I have read the "notes" and agree to all conditions

Notes (room ID or custom tag):


Qty:
Description
 
Diclaimer/notes: This is a regular wall cabinet with two doors and adjustable shelves. There is no cabinet bottom.

The back is still 1/4" thick plywood and slides into the grooves at the rear of the cabinet. Nothing holds the back in place until installation, when you screw through the back and nailers into the wall studs behind the cabinet.

This cabinet can be used as an appliance garage by removing the adjustable shelves. It can also be used for spice storage, plate storage, or general storage. The cabinet will be open to the countertop below.

The cabinet doors have a 1/4" reveal from the bottom of the doors to the bottom of the cabinet. This gap allows the doors to function properly when the cabinet sits directly on the countertop without rubbing. This gap cannot be reduced, as it is our standard reveal for countertop drop cabinets.
*If this cabinet is ordered with a HEIGHT over 48", then it will receive a two panel door configuration (each door will have two panels separated by a horizontal rail - maintains strength of door while minimizing warping and bowing).
Features
Custom Cabinets - Made In Oregon using globally sourced materials

Standard Cabinets Construction (the interior is not visible once doors/drawer are closed)

  • All cabinets are shipped ready to assemble (i.e. flat packed)
  • Full overlay (flush look) frame-less construction (European style, confirmat screw assembly, no glue or additional tools needed, just a screwdriver)
  • Full access (maximum storage capacity with no wasted space)

Materials
Doors are custom made and hand sanded in Oregon using high quality hardwoods.
Cabinet Cases are made in Oregon using globally sourced 3/4" thick birch plywood. Veneer is an ultra durable, baked-on UV clear finished real wood Birch veneer. Plywood core is a 3/4" thick core (11 ply, 9 ply, or 7ply, depending on availability).
Drawer Boxes are made in Oregon using globally sourced 5/8" solid Rubberwood finger joint lumber (clearcoat finished in a matte sheen, shipped fully assembled and notched for under-mount drawer slides, *dovetailed drawer box joints are left raw wood and will not have a finish applied).

Hardware
Hinges are made in North Carolina, Blum "Clip Top" Blumotion (soft closing, self closing)
Drawer slides are made in USA, BLUM Tandem+Blumotion, Under-mount, Soft-Close, full Extension, 100lbs capacity
All needed hardware for assembly is included with your order (includes assembly screws, shelf pins, hinge plates, etc)
*Knobs and Pulls are not included with any of our cabinets

Notes
*Construction holes will be visible on the sides, top, and bottom of the cabinet once assembled.
**Finished end panels (ordered separately) should be ordered to finish off the exposed cabinet sides after installation.

Share your knowledge of this product. Be the first to write a review »