 |
 |
 |
|
This is a standard finished end panel designed for tall cabinet applications measuring 96? and taller. It is a flat end panel with square edges that installs directly to the side of the cabinet. The front and back edges are banded with real wood veneer, while the top and bottom edges are exposed plywood.
Disclaimer: This is an oversized product exceeding 96? in height and requires special shipping considerations. Delivery may be delayed due to liftgate limitations. These tall pieces are packed on short, wide pallets, with weight kept as low as possible to improve handling at delivery. Despite this, the panel�s height and overall size can still create delivery challenges that are outside of our control.
As a result, this product may require an alternate delivery method and may ship later than the estimated timeframe. Please be prepared to work directly with the delivery carrier to coordinate and accept delivery.
Due to the size, weight, and awkward dimensions of this product, the likelihood of shipping damage is significantly higher than standard items. This product may also experience delays related to delivery constraints and material sourcing. Lead times are not guaranteed and may increase based on material availability, production factors, or shipping conditions.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
Custom Cabinets - Made In Oregon using globally sourced materials
Standard Cabinets Construction (the interior is not visible once doors/drawer are closed)
- All cabinets are shipped ready to assemble (i.e. flat packed)
- Full overlay (flush look) frame-less construction (European style, confirmat screw assembly, no glue or additional tools needed, just a screwdriver)
- Full access (maximum storage capacity with no wasted space)
Materials
Doors are custom made and hand sanded in Oregon using high quality hardwoods.
Cabinet Cases are made in Oregon using globally sourced 3/4" thick birch plywood. Veneer is an ultra durable, baked-on UV clear finished real wood Birch veneer. Plywood core is a 3/4" thick core (11 ply, 9 ply, or 7ply, depending on availability).
Drawer Boxes are made in Oregon using globally sourced 5/8" solid Rubberwood finger joint lumber (clearcoat finished in a matte sheen, shipped fully assembled and notched for under-mount drawer slides, *dovetailed drawer box joints are left raw wood and will not have a finish applied).
Hardware
Hinges are made in North Carolina, Blum "Clip Top" Blumotion (soft closing, self closing)
Drawer slides are made in USA, BLUM Tandem+Blumotion, Under-mount, Soft-Close, full Extension, 100lbs capacity
All needed hardware for assembly is included with your order (includes assembly screws, shelf pins, hinge plates, etc)
*Knobs and Pulls are not included with any of our cabinets
Notes
*Construction holes will be visible on the sides, top, and bottom of the cabinet once assembled.
**Finished end panels (ordered separately) should be ordered to finish off the exposed cabinet sides after installation.
|
|
|
|
|
|
|