Home > Kitchen > Base > Finished Ends >

Finished End Panel - APPLIED DOOR - VERTICAL STILE -base cabinets

Alternative Views:

Retail Price $719.95

Sale Price + Options: $399.95

Product Code: BFEAPPLIEDDOORVERTSTILE

Size

WIDTH*:

HEIGHT*:

DEPTH*:

Doors and Drawer Fronts

Door and Drawer Front Style*:

Door and Drawer Front Wood Type*:

Door/Drawer Front Prefinishing*:

Advanced Options

Disclaimer*:

I have read the "notes" and agree to all conditions

Notes (room ID or custom tag):

Qty:

Description

This is an applied door end panel with a matching outside edge detail that corresponds to the selected door style at the time of ordering. Order this base finished end panel 4" shorter than the cabinet it will be applied to. This allows you to install it 4" above the floor, enabling the toe kick to continue underneath all the way to the back wall.

Apply this panel to the end of the cabinet run to provide a finished look.

Disclaimer: This applied door end panel includes a vertical stile that divides the door into two panels (left and right). This design keeps the panel rigid and helps prevent warping or bowing. Because it is attached to the side of a cabinet, this panel does not carry a warranty against warping or bowing�the cabinet case it�s mounted to will provide structural support and keep it straight.

Features
Custom Cabinets - Made In Oregon using globally sourced materials

Standard Cabinets Construction (the interior is not visible once doors/drawer are closed)

All cabinets are shipped ready to assemble (i.e. flat packed)
Full overlay (flush look) frame-less construction (European style, confirmat screw assembly, no glue or additional tools needed, just a screwdriver)
Full access (maximum storage capacity with no wasted space)

Materials
Doors are custom made and hand sanded in Oregon using high quality hardwoods.
Cabinet Cases are made in Oregon using globally sourced 3/4" thick birch plywood. Veneer is an ultra durable, baked-on UV clear finished real wood Birch veneer. Plywood core is a 3/4" thick core (11 ply, 9 ply, or 7ply, depending on availability).
Drawer Boxes are made in Oregon using globally sourced 5/8" solid Rubberwood finger joint lumber (clearcoat finished in a matte sheen, shipped fully assembled and notched for under-mount drawer slides, *dovetailed drawer box joints are left raw wood and will not have a finish applied).

Hardware
Hinges are made in North Carolina, Blum "Clip Top" Blumotion (soft closing, self closing)
Drawer slides are made in USA, BLUM Tandem+Blumotion, Under-mount, Soft-Close, full Extension, 100lbs capacity
All needed hardware for assembly is included with your order (includes assembly screws, shelf pins, hinge plates, etc)
*Knobs and Pulls are not included with any of our cabinets

Notes
*Construction holes will be visible on the sides, top, and bottom of the cabinet once assembled.
**Finished end panels (ordered separately) should be ordered to finish off the exposed cabinet sides after installation.

Share your knowledge of this product. Be the first to write a review »