Home > Order RTA Cabinets > Base > Standard >

2 door base cabinet with TRAY DIVIDERS AND ADJUSTABLE SHELVES
2 door base cabinet with TRAY DIVIDERS AND ADJUSTABLE SHELVES


 
Alternative Views:
Retail Price $791.91
Sale Price: $439.95
Savings: $351.96

Price with Selected Options: $439.95


Product Code: B2DTRAYV3

Cabinet Size (base cabinets)

WIDTH*:

HEIGHT*:

DEPTH*:
Doors and Drawer Fronts

Door and Drawer Front Style*:

Door and Drawer Front Wood Type*:

Door/Drawer Front Prefinishing*:

Glass Door Prep*:
Slide Out Shelves

Pull Out Shelves*:
Advanced Options

Toe Kick*:

Notes (room ID or custom tag):

Qty:  
Description
 
This is a double door base cabinet with tray dividers behind the door on the right side and adjustable shelves on the left. Please measure your trays to ensure that they will fit into the cabinet prior to ordering. Tray opening is a 20" tall (i.e. you can fit tray up to 20" tall into this cabinet). The interior depth (measurement from front of the cabinet case to the inside of the cabinet back panel) is the total cabinet DEPTH minus 1". For example, if you order this tray divider cabinet with a DEPTH of 24", then the interior depth of the cabinet will be 23". Cabinet depth of 24-26" is recommended.
Features
  • Custom Cabinets - Made In Oregon using globally sourced materials

  • Standard Cabinets (the interior is not visible once doors/drawer are closed)


  • Construction
    All cabinets are shipped ready to assemble (i.e. flat packed)
    Full overlay (flush look) frame-less construction (European style, confirmat screw assembly)
    Full access (maximum storage capacity with no wasted space)

    Materials
    Doors are custom made and hand sanded in Oregon using high quality hardwoods
    Cabinet Cases are made in Oregon using Globally sourced birch/"hoop pine" veneered 3/4" thick plywood substrate.
    Drawer Boxes are made in Oregon using globally sourced 5/8" solid Rubberwood lumber (clearcoat finished in a matte sheen, shipped fully assembled and notched for under-mount drawer slides, *dovetailed drawer box joints are left raw wood and will not have a finish applied).

    Hardware
    Hinges are made in North Carolina, Blum "Clip Top" Blumotion (soft closing, self closing)
    Drawer slides are Globally sourced, Under-mount, Soft-Close, full Extension, 75lbs capacity
    All needed hardware for assembly is included with your order (includes assembly screws, shelf pins, hinge plates, etc)
    *Knobs and Pulls are not included with any of our cabinets

    Notes
    Construction holes will be visible on the sides, top, and bottom of the cabinet once assembled.
    Finished end panels (ordered separately) should be ordered to finish off the exposed cabinet sides after installation.

Share your knowledge of this product. Be the first to write a review »